FAQ

02:57 0 Comments

Frequently Asked Questions

Q: How do Cargo Dry Pak help to solve moisture problems?

Cargo Dry Pak contains Calcium Chloride that very aggressively grabs and absorbs moisture from the air.   Cargo Dry Pak preventing humidity inside the container reaching the dew point & condensing, thus protects your cargo from the threats of mold, mildew, fungus formation, loose carton, peeling of labels and condensation.

Q: What Is Relative Humidity? (RH%)

Relative Humidity measures the amount of the moisture in the Air .It is expressed in percentage of how much amount of moisture the air could possible held.

Q: What is the most common problem caused by Moisture?
Moisture in containers causes problems such as mold, mildew, fungus formation, rust decay, lumping & caking. Moisture can also cause electronics to malfunction.
Q: I fumigate my containers; do I still need to put in Cargo Dry Pak?
Fumigations & using Cargo Dry Pak have two different purposes and are not alternative to protect your goods against moisture damage. Fumigation is primarily to eliminate insect & eggs in container and in goods. It has no influence on humidity inside the container.


Q: I load my container under dry conditions and it is very tightly sealed. How come I still experience moisture problems?

If there are still moisture problem, you need to increase number of Cargo Dry Pak currently you are using in containers. There are many reasons and factors for higher amount of moisture inside the container. Some of them are
Container Floor: Recent studies prove that the moisture content of the wooden floor is higher they used to be. That is partly because of the quality of wood that is being used nowadays & partly because the floor are being cleaned with water and not dried out  enough before being used.
Packaging:  Wooden pallets always contain more than 20 % moisture, which always cause problems, whichever the products put on pallets. The packaging often being carton contains lot of moisture in itself, which will spread in to the cargo or vaporize in to air.

Products: The biggest factor of moisture inside the container is the products itself. The Moisture content varies roughly spoken between 10% & 35%.When MC reach the 25% the cargo Is always under the threats.

Journey & Climatic Factor: When all the above factors are controlled and there is still a problem, they surely are the conditions during transport. The first point of consideration is the transport time .It depends on the destination and more importantly the climate during the shipment and final destination. Basically the change in the temperature and automatically the relative humidity is the cause of the condensation. As long transit cannot be avoided, than our advice is to add more number of cargo dry pak to absorbs





Q: I have shipped the same cargo for years with Cargo Dry Pak without any trouble, but now I have a lot of damage. Please guide.

Check your container and your packaging material. Did you just start to store your pallets outdoors? Did you just change supplier of crates? You can’t tell by looking whether wood or carton is dry. The moisture properties of wood and cartons have an exponential character. It makes a huge difference if your pallets moisture content should be 20% instead of 17%.


Q: I ship consumer goods in tubes/cans/jars etc. that contain no moisture, yet I still have problems.

Consumer goods are often shipped with a lot of cardboard packaging. Even if the boxes seem dry they could literally hold tons of water.


Q: My cargo of peanuts had suffered damage in the center even though the outside of the cargo looked fine and there were no signs of condensation?

Lots, if not most, damage to cargoes is caused by prolonged periods of elevated humidity without any condensation (Container rain, Container sweat, Super Saturation Event). It is common that cargoes loaded at cool temperature and then moved into warm condition suffer damage in the center of the cargo as a result of a difference in temperature between the outside and the center of the cargo. Warm air from the outside of the cargo becomes humid as it moves into the cooler center. Cargo Dry Pak protect against this effect even though the Cargo Dry Pak are mounted on the container walls.


Q: I had damage to my cargo even though I used lots of silica gel and there was no condensation. Would it help to switch to Cargo Dry Pak?

Calcium Chloride absorbs moisture even when the humidity is not very high. This protects the cargo against damage caused by prolonged periods of elevated humidity. Some kinds of steel start to corrode at 70% relative humidity, molds can grow at 80% relative humidity and at near 90% relative humidity lots of things go wrong. Yet Cargo Dry Pak is also at their most efficient protecting against condensation. Most other products, such as silica gel, are really effective only in very humid conditions and in protecting the cargo against condensation damage and for a short period .You have to use Cargo Dry Pak , silica gel will not be right option.


Q: What is so great about Cargo Dry Pak anyway?

Well, they will not fall off the wall,  will not get punctured during loading and unloading, leave a wet puddle on the cargo or run out after half the voyage. They are installed in seconds without ladders and take up no cargo space. The capacity of each Cargo Dry Pak is big, so fewer are required. The cost of an installation is very competitive, even against much inferior alternatives.


Q: How many Numbers of Cargo Dry Pak do I need?

The number of Cargo Dry Pak required to protect the cargo depends on the cargo, the temperature conditions during the voyage, the length of the voyage – and just how safe you want to be. For some really dry cargoes eg. steel coils or household removals 15 kg of Cargo Dry Pak are enough for 20 feet container.


Q: Do I need to line my container with Kraft paper?

Lots of containers are lined with Kraft paper primarily for reasons of hygiene or to simply isolate the cargo from direct contact with the container walls. The liner will act as a kind of sponge, catching and absorbing any droplets of water and there By -evaporating the moisture into the air. If liner is used without Cargo Dry Pak it could contribute tap a kind of pumping effect, drawing moisture out of the cargo. When used together with Cargo Dry Pak the liner will act as a buffer in extreme conditions, and will prevent any container rain from reaching the cargo. But we recommend not use Kraft paper or Liner.


Q: My container is absolutely filled with cargo. Will the Cargo Dry Pak still work?

Moisture diffuses very effectively, even though a seemingly compact cargo. Experience shows that Cargo Dry Pak will make a difference even to mold growth inside cartons in the cargo. It is, however, necessary that some free space should be left in front of each Cargo Dry Pak. If some Cargo Dry Pak has collected less water than others inside a container, there may be a problem with air access to that Cargo Dry Pak.



Q: I have problems with mold growth inside my shrink wrapped pallets. Will Cargo Dry Pak help?

Yes, so long that there is some access of air through the top and bottom of the pallets. If this is not possible, a spiked roller may be used to tear holes in the shrink wrap.


Q: My shipments of steel/galvanized components/aluminum/ machinery etc. arrives corroded, stained or miss colored despite heavy packaging. Will Cargo Dry Pak help?

You can forget about your tactile coatings, oil-paper and plastic wraps that are expensive both to apply and remove. Your container can probably be equipped with a sufficient number of Cargo Dry Pak to protect against any damage at less cost than your present packaging.









0 comments: